Toshiba e-STUDIO556 Service Manual page 231

(2) Disconnect the connector for each sensor,
and take off the sensor.
[ 6 ] Tandem LCF tray-up motor (M41)
(1) Take off the switching regulator.
( P.9-9 "9.1.11 Switching regulator (PS) (e-
STUDIO556/656/756/856)")
( P.9-9 "9.1.12 Switching regulator (PS)
(e-STUDIO557/657/757/857)")
(2) Disconnect 1 connector, remove 3 screws
and take off the Tandem LCF tray-up motor.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
End fence
stop position sensor
Standby side empty sensor
Fig. 4-186
Tandem LCF tray-up motor
Fig. 4-187
e-STUDIO556/656/756/856/557/657/757/857
4 - 67
End fence
home position sensor
Screw
Screw
DISASSEMBLY AND REPLACEMENT
4