Toshiba e-STUDIO556 Service Manual page 210

(3) Remove 1 clip to take off the feed roller.
(4) Remove 1 clip to take off the separation
roller.
[ 2 ] Drawer empty sensor (S31/S37/ S43/ S49)
(1) Disconnect 1 connector to take off the
drawer empty sensor.
[ 3 ] Tray-up sensor (S32/S38/S44/S50)
(1) Disconnect 1 connector.
(2) Pull the lever and take off the tray-up sensor
while the pickup roller is lowered.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Separation roller
Fig. 4-125
Drawer empty sensor
Fig. 4-126
Fig. 4-127
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 46
Feed roller
Tray-up sensor