Toshiba e-STUDIO556 Service Manual page 270

4.10.5 Transfer/Transport unit
(1) Take off the transfer unit.
( P.4-102 "4.10.1 Transfer unit")
(2) Take off the fuser unit.
( P.4-115 "4.11.2 Fuser unit")
Note:
Make sure to take off the fuser unit and
transfer unit before the transfer/transport
unit.
(3) Remove 2 stepped screws fixing the slide
rail.
(4) Hold A (shaft) or B (stay) with your left hand.
(5) Hold the slide rail on the right with your right
hand.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Slide rail
Screw
A
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 106
Transfer/transport unit
Fig. 4-297
Slide rail
Screw
Fig. 4-298
B
Fig. 4-299