Toshiba e-STUDIO556 Service Manual page 342

(3) Remove 2 screws. Disconnect 1 connector
and take off the sensor bracket.
(4) Release 2 latches and take off the original
exit/reverse sensor.
4.13.50 Original reverse unit opening/closing sensor (SR14)
(1) Take off the reading end guide.
( P.4-142 "4.13.11 Exit guide / Exit/reverse
guide / Reading end guide")
(2) Disconnect 1 connector. Release 2 latches
and take off the original reverse unit opening/
closing sensor.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 178
Fig. 4-505
Fig. 4-506
Fig. 4-507