Toshiba e-STUDIO556 Service Manual page 514

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO556:

General Descriptions for PM Procedure

Perform the preventive maintenance in the following timing.

e-STUDIO556/557:every 460,000 sheets

e-STUDIO656/657:every 515,000 sheets

e-STUDIO756/757:every 540,000 sheets

e-STUDIO856/857:every 600,000 sheets

Ask the user about the current conditions of the equipment and note them down.

Before starting maintenance, make some sample copies and store them.

See the replacement record and check the parts to be replaced in the PM support mode (6S-

2) or list printing mode (9S-103).

: [6] + [START] + [POWER] ON  [2]  [START]

9S-103 : [9] + [START] + [POWER] ON  [103]  [START]

PM SUPPORT CODE LIST

2012-04-09 13:16

DRUM BLADE(K)

MAIN CHARGER NEEDLE(K)

CHARGER CLEANING PAD(K)

DRUM BLADE(Y)

Turn OFF the power and make sure to unplug the equipment.

Perform a preventive maintenance using the following checklist and illustrations.

Plug in the equipment after the maintenance has been finished. Then turn ON the power and

make some copies to confirm that the equipment is working properly.

e-STUDIO556/656/756/856/557/657/757/857

PREVENTIVE MAINTENANCE (PM)

S/N : CYL000001

FIN S/N : FIN S/N-xxxxxxxx

TOSHIBA e-STUDIOxxxx

OUTPUT PAGES

PM OUTPUT PAGES DRIVE COUNTS

DEVELOP COUNTS

PM DRIVE COUNTS