Toshiba e-STUDIO556 Service Manual page 224

4.6.7 Registration roller unit
(1) Take off the cleaner unit.
(2) Remove 1 screw and take off the fixing
bracket.
(3) Open the right center cover and disconnect 1
connector.
(4) Pull out the registration roller unit toward the
front side while tilting it.
[ 1 ] Registration roller (rubber)
(1) Remove 2 screws and take off the paper
guide.
(2) Remove 1 screw and take off the plate
spring.
(3) Remove 1 clip and 2 springs.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Registration roller unit
Fixing bracket
Fig. 4-166
Plate spring
Fig. 4-167
Spring
Fig. 4-168
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 60
Paper guide
Clip