Toshiba e-STUDIO556 Service Manual page 333

4.13.36 Original jam access cover opening/closing switch (SWR1)
(1) Take off the RADF board bracket.
( P.4-136 "4.13.3 RADF rear cover")
(2) Take off the harness guide.
( P.4-160 "4.13.27 Original feed motor
bracket")
(3) Disconnect 3 connectors.
(4) Remove 1 screw and take off the original jam
access cover opening/closing switch.
4.13.37 RADF opening/closing switch (SWR2)
(1) Take off the RADF board bracket.
( P.4-181 "4.13.56 RADF board bracket")
(2) Disconnect 3 connectors.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-478
Fig. 4-479
Fig. 4-480
e-STUDIO556/656/756/856/557/657/757/857
4 - 169
DISASSEMBLY AND REPLACEMENT
4