Toshiba e-STUDIO556 Service Manual page 929

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO556:

(17) Restore the key and license data by following the steps below.

Restore the key data by pressing the [1] key to select "1. Key SRAM to FROM", then press

the [START] button.

If the state of "FROM Licence Status" is "KeyMismatch", restore the license data by pressing

the [3] key to select "3. License SRAM to FROM", then press the [START] button.

If ADI-HDD is installed, restore the encryption key data by pressing the [5] key to select "5.

ADIKey SRAM to FROM", then press the [START] button.

(18) Press the [ON/OFF] button to shut down the equipment.

(19) Perform the initialization of the updating data.

Press the [ON/OFF] button while simultaneously holding down the [0] and [8] buttons.

Key in "9030", and then press the [START] button.

Press the [INITIALIZE] button.

[B] Confirmation of the updated data

After the updating is completed, check each data version in the Setting Mode (08) to confirm that the

data were overwritten properly.

 P.11-62 "11.7 Confirmation of the updated data"

e-STUDIO556/656/756/856/557/657/757/857

FIRMWARE UPDATING