(3)
After winding the wires around the pulleys, attach the wire holder jigs not to loosen the wires.
Notes:
•
When the wire holder jig is attached, make sure that the wire is not shifted or loosened.
•
The wire should come out of the slot of the wire holder jig and be passed through between the
arm and the jig.
Wire holder jig
e-STUDIO556/656/756/856/557/657/757/857
ADJUSTMENT
Arm
Fig. 6-37
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
6 - 54