Toshiba e-STUDIO556 Service Manual page 534

* 3. Dustproof slit glass
Take off the cleaner unit. Then release the hook to take off the dustproof slit glass unit and
clean the face and back side of the dustproof slit glass.
Dustproof slit glass unit
* 4. Pickup roller / feed roller / separation roller
When installing the pickup roller and feed roller, pay attention to allocate the pickup roller,
gear, feed roller and one-way clutch correctly.
When replacing the separation roller, replace only the roller and continue to use the torque
limiter.
e-STUDIO556/656/756/856/557/657/757/857
PREVENTIVE MAINTENANCE (PM)
Fig. 7-14
Dustproof slit glass
Fig. 7-15
Gear
Idler gear
shaft
Torque
limiter
Separation roller
Fig. 7-16
7 - 24
Pickup roller
One-
way clutch
Feed roller
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved