Clear [Alarm | Error | Alarm Log | Memory] [Dist] - Avaya Communication Server 1000M Single Group Manual

ALARM DISABLE (A D)
This command will prevent the MCR system from asserting its alarm relay output while in alarm
mode. Its display is similar to
Figure 14: ALARM DISABLE (A D) screen
The default for system alarms is ALARMS ENABLED. To take advantage of the alarms
provided, be sure alarms are enabled during normal operation.

CLEAR [ALARM | ERROR | ALARM LOG | MEMORY] [DIST]

The CLEAR commands allow the user to reset various system notification and record-keeping
devices to the default level. The commands are described in alphabetic order.
CLEAR ALARM (C A)
This command resets MCR's alarm indicator to all-systems normal. Its display is similar to
Figure 15: CLEAR ALARM (C A) screen
Figure 15: CLEAR ALARM (C A) screen
CLEAR ALARM LOG (C A L)
This command removes all entries from MCR's near-end alarm log. Its display is similar to
Figure 16: CLEAR ALARM LOG (C A L) screen
Figure 16: CLEAR ALARM LOG (C A L) screen
Mini-Carrier Remote Fundamentals
Figure 14: ALARM DISABLE (A D) screen
on page 77.
on page 77.
Host MMI interface
on page 77.
March 2013 77