Operating Instruction EXTRAmatic 9040
|
4 Start-up
4.2 Connector
4.2.7 Connecting the foot switch
▶ Place the foot switch ③ on the floor.
▶ To connect the foot switch ③ to the extractor unit, insert the foot switch lead
② into the appropriate socket ① on the extractor unit (ensuring it is positioned
correctly).
1
4.2.8 Connecting an external control panel
▶ Install the external control panel in its intended location.
Note
Make sure that all constituent parts are positioned correctly.
▶ Plug the cable from the external control panel into the extractor unit.
1
c
EXTRAmati
4
2
2
3
2
3
EXTRAmati
c
31/62