Ftp Configuration: A Switch Operating As An Ftp Server - Huawei Quidway S3100 Series Operation Manual

Operation Manual – FTP and TFTP
Quidway S3100 Series Ethernet Switches

1.1.2 FTP Configuration: A Switch Operating as an FTP Server

I. Prerequisites
A switch operates as an FTP server. A remote PC operates as an FTP client. The
network operates properly, as shown in Figure 1-1.
Following configurations are performed on the FTP server:
Creating local users
Setting local user passwords
Setting the password display mode for the local user
Configuring service types for the local users
(For the information about these configurations, refer to these commands in "AAA and
RADIUS Configuration" module: local-user, local-user password-display-mode,
password, and service-type.)
II. Configuration procedure
Table 1-3 Configure an FTP server
Operation
Enter system view
Enable the FTP
server function
Set the connection
idle time
Display
information about a
switch operating as
an FTP server
Display
information about
the FTP clients
Command
system-view
ftp server enable
ftp timeout minute
the
display ftp-server
the
display ftp-user
Huawei Technologies Proprietary
1-3
Chapter 1 FTP and TFTP Configuration
Description
—
Required
By default, the FTP server
function is disabled.
Optional
The default connection idle
time is 30 minutes.
You can execute these two
commands in any view.