Removing And Installing Anti-Roll Bar - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
Specified torques
♦ ⇒ "2.1 Assembly overview - subframe", page 18
♦ Bolts for pendulum support ⇒ Rep. gr. 10 ; Assembly mount‐
ings; Assembly overview - assembly mountings
♦ Bolts for noise insulation ⇒ General body repairs, exterior;
Rep. gr. 66 ; Noise insulation; Assembly overview - noise in‐
sulation .
2.5

Removing and installing anti-roll bar

Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1332-
♦ Engine and gearbox jack - VAS 6931-
Removing
– Remove wheels.
– If present, remove lower noise insulation ⇒ General body re‐
pairs, exterior; Rep. gr. 66 ; Noise insulation; Assembly over‐
view - noise insulation .
Vehicles with natural gas engines
– Detach natural gas line -1- from clip -arrow-.
42
Rep. gr.40 - Front suspension