– Remove bolts -1- for pendulum support.
– Remove nut -1- from coupling rod -3- (left and right sides).
– Pull out coupling rod -3- from anti-roll bar -2- on left and right
side.
– Remove nuts -arrows- on both sides of vehicle.
– Pull swivel joint out of suspension link.
– Loosen nut on track rod ball joint but do not remove complete‐
ly.
– Using ball joint puller - T10187- -1-, press track rod ball joint
off wheel bearing housing, and unscrew nut.
Caution
Leave nut screwed several turns onto track rod ball joint shank
to protect thread.
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
365
3. Steering rack