Seat Leon 2013 Workshop Manual page 92

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
Grease bonded rubber bush:
The kidney-shaped area -1- of the rubber bush must be greased.
– To do this, apply grease from the upper side of the kidney-
shaped area -1-.
– Use grease -N.052.150.00.- .
– The required quantity of grease for both sides is approx. 1 cm
-Dimension a-.
• Apply about half the grease quantity in each kidney-shaped
area (approx. 0.5 cm).
– The grease must be applied to the upper side with a normal
paint brush.
– The contact surfaces for the suspension link must not come
into contact with the grease.
– Install lower suspension link
♦ Vehicles with manual gearbox or dual clutch gearbox 0CW
⇒ page 69
♦ Vehicles with dual clutch gearbox 0D9
86
Rep. gr.40 - Front suspension
⇒ page 69 .
⇒ page 71