Seat Leon 2013 Workshop Manual page 202

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
11 - Lower transverse link
❑ Removing and installing
12 - Eccentric bolt
❑ A wheel alignment check must be performed if loosened
❑ Do not turn more than 90° to the left or to the right (that is, from the permitted minimum adjustment range
to the maximum)
13 - Eccentric washer
❑ Inner hole with lug
14 - Nut
❑ Always renew after removing
❑ Always tighten bolted joints with suspension in unladen position
❑ 95 Nm
15 - Subframe
16 - Eccentric bolt
❑ A wheel alignment check must be performed if loosened
❑ Do not turn more than 90° to the left or to the right (that is, from the permitted minimum adjustment range
to the maximum)
17 - Eccentric washer
❑ Inner hole with lug
18 - Nut
❑ Always renew after removing
❑ Always tighten bolted joints with suspension in unladen position
❑ 95 Nm
196
Rep. gr.42 - Rear suspension
⇒ page 201
⇒ page 290
⇒ page 8
⇒ page 290
⇒ page 8