Seat Leon 2013 Workshop Manual page 212

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
❑ Always tighten bolted connection with suspension in unladen position
❑ 70 Nm +180°
6.1.2 Assembly overview - suspension strut, shock absorber, spring, multi-link
suspension
1 - Bolt
❑ Always renew after re‐
moving
❑ 50 Nm +45°
2 - Shock absorber
❑ Removing and installing
⇒ page 207
❑ Note correct installation
position of cable tie fas‐
tener.
❑ Defective shock absorb‐
ers must always be de‐
gassed and drained be‐
fore disposal
⇒ page 15 .
3 - Upper spring seat
❑ Fit on "lug" on body.
4 - Spring
❑ Removing and installing
⇒ page 215
5 - Clip
❑ Assists with installation
6 - Lower spring seat
❑ Turn end of spring
against stop
❑ When installing, fit pin
into aperture in spring
mounting on lower
transverse link -arrow-.
7 - Lower transverse link
8 - Nut
❑ Always renew after re‐
moving
❑ Always tighten bolted connection with suspension in unladen position
❑ 70 Nm +180°
9 - Bolt
❑ Always renew after removing
206
Rep. gr.42 - Rear suspension
Volkswagen Technical Site: http://vwts.ru http://vwts.info
⇒ page 8
⇒ page 8