Seat Leon 2013 Workshop Manual page 203

5.1.2 Assembly overview - transverse link, multi-link suspension, four-wheel drive
1 - Washer
2 - Nut
❑ Always renew after re‐
moving
3 - Upper transverse link
❑ Removing and installing
⇒ page 199
4 - Washer
5 - Bolt
❑ Always renew after re‐
moving
❑ Always tighten bolted
joints with suspension in
unladen position
⇒ page 8
❑ 130 Nm +180°
6 - Wheel bearing housing
7 - Nut
❑ Always renew after re‐
moving
8 - Expanding rivet
9 - Bolt
❑ Always renew after re‐
moving
❑ Always tighten bolted
joints with suspension in
unladen position
⇒ page 8
❑ 70 Nm +180°
10 - Lower transverse link
❑ Removing and installing
⇒ page 201
11 - Stone deflector
12 - Bolt
❑ 8 Nm
13 - Subframe
14 - Eccentric bolt
❑ A wheel alignment check must be performed if loosened
❑ Do not turn more than 90° to the left or to the right (that is, from the permitted minimum adjustment range
to the maximum)
15 - Nut
❑ Always renew after removing
❑ Always tighten bolted joints with suspension in unladen position
❑ 95 Nm
16 - Eccentric washer
❑ Inner hole with lug
17 - Eccentric bolt
❑ A wheel alignment check must be performed if loosened
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
⇒ page 290
⇒ page 8
⇒ page 290
5. Suspension link, track rod
197