Wheels, Tyres, Vehicle Geometry; Wheel Alignment; Notes For Wheel Alignment - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
44 –

Wheels, tyres, vehicle geometry

1

Wheel alignment

⇒ "1.1 Notes for wheel alignment", page 290
⇒ "1.2 Test requirements", page 291
⇒ "1.3 Preparing for measuring", page 292
⇒ "1.4 Specified values for wheel alignment", page 294
⇒ "1.5 Setting vehicle to initial position for wheel alignment", page
299
⇒ "1.6 Wheel alignment procedure", page 299
⇒ "1.7 Necessity of wheel alignment", page 302
⇒ "1.8 Front axle camber: correction", page 304
⇒ "1.9 Adjusting camber at rear wheels", page 305
⇒ "1.10 Adjusting toe setting at rear wheels", page 307
⇒ "1.11 Adjusting front axle convergence", page 308
⇒ "1.12 Wheel runout compensation", page 309
⇒ "1.13 Vehicle data label", page 309
⇒ "1.14 Checking full wheel lock", page 310
1.1

Notes for wheel alignment

When measuring actual dimensions, only a SEAT approved axle
measuring device may be used!
Both the rear and the front axle have to be measured.
If not, there is no guarantee that the performance of the vehicle
will be correct.
– Use the alignment computer to align the axles.
All the information on wheel alignment can be found in the wheel
alignment computer.
If not, the rack and pinion may not be centred.
The current »Update« data is stored in SEAT ServiceNet.
⇒ VW ServiceNet; Systems; Wheel alignment computer soft‐
ware; Wheel alignment; Beissbarth
⇒ VW ServiceNet; Systems; Wheel alignment computer soft‐
ware; Wheel alignment; Hunter
⇒ VW ServiceNet; Systems; Wheel alignment computer soft‐
ware; Wheel alignment; Corghi
⇒ VW ServiceNet; Systems; Wheel alignment computer soft‐
ware; Wheel alignment; John Bean
290
Rep. gr.44 - Wheels, tyres, vehicle geometry