Suspension Strut, Shock Absorber, Spring; Assembly Overview - Suspension Strut, Shock Absorber, Spring - Seat Leon 2013 Workshop Manual

6 Suspension strut, shock absorber,
spring
⇒ "6.1 Assembly overview - suspension strut, shock absorber,
spring", page 205
⇒ "6.2 Shock absorber: removing and fitting", page 207
⇒ "6.3 Repairing shock absorber", page 212
⇒ "6.4 Removing and installing spring", page 215
6.1 Assembly overview - suspension strut,
shock absorber, spring
⇒ "6.1.1 Assembly overview - suspension strut, shock absorber,
spring, torsion beam axle", page 205
⇒ "6.1.2 Assembly overview - suspension strut, shock absorber,
spring, multi-link suspension", page 206
6.1.1 Assembly overview - suspension strut, shock absorber, spring, torsion
beam axle
1 - Bolt
❑ Always renew after re‐
moving
❑ 50 Nm +45°
2 - Shock absorber
❑ Removing and installing
⇒ page 207
❑ Defective shock absorb‐
ers must always be de‐
gassed and drained be‐
fore disposal
⇒ page 15 .
3 - Upper spring seat
❑ Fit on "lug" on body.
4 - Spring
❑ Removing and installing
⇒ page 215
5 - Clamping ring
❑ After installing stone de‐
flector, press clamp ring
on so it is flush
6 - Lower spring seat
❑ Turn end of spring
against stop
❑ When installing, fit pin in
aperture in spring
mounting on axle beam.
7 - Axle beam
8 - Stone deflector
9 - Expanding rivet
10 - Bolt
❑ Always renew after removing
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018

6. Suspension strut, shock absorber, spring

205