Seat Leon 2013 Workshop Manual page 199

Special tools and workshop
equipment required
♦ Torque wrench - V.A.G 1331-
♦ Tensioning strap - T10038-
♦ Engine and gearbox jack - VAS 6931-
Removing
– Remove rear wheel on affected side.
– Use tensioning straps - T10038- to strap vehicle to support
beams of lifting platform on both sides.
1 - Tensioning strap - T10038-
WARNING
If the vehicle is not strapped down, it may slip off the lifting
platform. !
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
193
4. Anti-roll bar