Seat Leon 2013 Workshop Manual page 188

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
1 - Hexagonal nut - T10263/5-
2 - Thrust piece - T10356/7- - the marking -A- faces towards sub‐
frame
3 - Subframe
4 - Align bonded rubber bush on mark, made for this purpose (the
marks must align with one another)
5 - Thrust piece - T10356/8- - the flattened sides must engage in
cover of bonded rubber bush -arrows-.
6 - Tightening plate - T10205/1-
7 - Hydraulic press - VAS 6178- and thrust piece - T10205/13-
8 - Hexagonal nut - T10263/5-
9 - Threaded spindle - T10263/4-
– Check position of bonded rubber bush, align as required and
take up play in special tools with bonded rubber bush.
182
Rep. gr.42 - Rear suspension