Seat Leon 2013 Workshop Manual page 294

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
Removing
– Unplug the electrical connector -1-.
– Unscrew the bolts -2- and -3-.
– Take out rear left vehicle level sender - G76- -4-.
Installing
Installation is carried out in reverse order, noting the following:
Note
The lever of rear left vehicle level sender - G76- must face outside
of vehicle.
• Carry out basic setting of vehicle level sender ⇒ Vehicle diag‐
nostic tester.
• Perform basic setting of headlights ⇒ Electrical system; Rep.
gr. 94 ; Headlights; Adjusting headlights .
Specified torques
♦ ⇒ "2.2.2 Assembly overview - rear vehicle level senders, multi-
link suspension, front-wheel drive", page 283
2.4.3 Removing and installing rear left vehicle
level sender - G76- , multi-link suspen‐
sion, four-wheel drive
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1410-
288
Rep. gr.43 - Self-levelling suspension