– Using ball joint puller - T10187- -1-, press track rod ball joint
off wheel bearing housing, and unscrew nut.
Caution
Leave nut screwed several turns onto track rod ball joint shank
to protect thread.
Vehicles with vehicle level senders
– Disconnect connector -1- on front left vehicle level sender -
G78- and/or front right vehicle level sender - G289- , as
applicable.
Continuation for all vehicles
– Disconnect connector -1- of the oil level and oil temperature
sender - G266- .
– If installed, disconnect the connector -2- from the heating sup‐
port pump - V488- . Open locking mechanism -3- in
-direction of arrow-, and release connector.
– Pull wiring harness -3- clips -1- and -2- off subframe and steer‐
ing box.
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
33
2. Subframe