Seat Leon 2013 Workshop Manual page 161

1.3.3 Removing and installing rear axle, multi-
link suspension, four-wheel drive
Special tools and workshop equipment required
♦ Tensioning strap - T10038-
♦ Torque wrench - V.A.G 1332-
Removing subframe with attachments
– Remove rear wheels.
– Unplug electrical connector -1- from ABS speed sensor on
both sides and move clear.
Vehicles with electrical parking brake
– Disconnect the electrical connector -2-right and left of the en‐
gine of the electromechanical parking brake on the brake
caliper.
Vehicles with manual parking brake
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
155
1. Rear axle