Seat Leon 2013 Workshop Manual page 84

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
Continuation for all vehicles
– Unscrew nuts -arrows-.
– Pull drive shaft slightly out of wheel hub.
If the drive shaft cannot be pulled out of the wheel bearing by
hand, use press tool - T10520- .
Before using press tool - T10520- ensure that thrust piece -1- is
inserted.
Using press tool - T10520- :
– To be able to press out the drive shaft -3-, secure press tool -
T10520- -1- to the wheel hub -2- using 3 wheel bolts.
78
Rep. gr.40 - Front suspension