Seat Leon 2013 Workshop Manual page 380

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
– Remove nuts -arrows- on both sides of vehicle.
– Pull swivel joint out of suspension link.
– Using ball joint puller - T10187- -1-, press track rod ball joint
off wheel bearing housing, and unscrew nut.
Caution
Leave nut screwed several turns onto track rod ball joint shank
to protect thread.
Vehicles with vehicle level senders
– Disconnect connector -1- on front left vehicle level sender -
G78- and/or front right vehicle level sender - G289- , as
applicable.
Continuation for all vehicles
– Disconnect connector -1- for oil level and oil temperature
sender - G266- .
– If fitted, disconnect connector -2- on continued coolant circu‐
lation pump - V51- . Open locking mechanism -3- in
-direction of arrow-, and release connector.
374
Rep. gr.48 - Steering