Anti-Roll Bar; Assembly Overview - Anti-Roll Bar - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
4

Anti-roll bar

⇒ "4.1 Assembly overview - anti-roll bar", page 190
⇒ "4.2 Removing and installing anti-roll bar", page 191
⇒ "4.3 Removing and installing coupling rod", page 192
4.1

Assembly overview - anti-roll bar

⇒ "4.1.1 Assembly overview - anti-roll bar, multi-link suspension,
front-wheel drive", page 190
⇒ "4.1.2 Assembly overview - anti-roll bar, multi-link suspension,
four-wheel drive", page 191
4.1.1 Assembly overview - anti-roll bar, multi-link suspension, front-wheel drive
1 - Lower transverse link
2 - Nut
❑ Always renew after re‐
moving
❑ 20 Nm +180°
3 - Connecting rod
❑ Removing and installing
⇒ page 192
4 - Bolt
❑ Tighten evenly
❑ Always renew after re‐
moving
❑ 20 Nm +90°
5 - Bolt
❑ Always renew after re‐
moving
6 - Nut
❑ When tightening, coun‐
terhold at multi-point
socket of coupling rod
❑ 55 Nm
7 - Anti-roll bar
❑ With rubber bushes
❑ Removing and installing
⇒ page 191
8 - Subframe
190
Rep. gr.42 - Rear suspension