León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
– Unclip wiring harness -1- from steering box -2- -arrows-.
– Pull out spreader clip -arrow-.
– Lower subframe using engine and gearbox jack - VAS 6931- .
– Lever off steering rack from subframe with a large screwdriver,
for example, and remove backwards.
– Put steering box down as shown.
This prevents damage to control unit -1-.
Installing
Installation is carried out in reverse order, noting the following:
The threaded bushings of the steering box should sit well in the
openings of the strut.
– Plug in connectors -1- and -2- so that they engage audibly.
376
Rep. gr.48 - Steering