Assembly Overview - Track Rod - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
❑ Do not turn more than 90° to the left or to the right (that is, from the permitted minimum adjustment range
to the maximum)
18 - Eccentric washer
❑ Inner hole with lug
19 - Nut
❑ Always renew after removing
❑ Always tighten bolted joints with suspension in unladen position
❑ 95 Nm
5.2

Assembly overview - track rod

⇒ "5.2.1 Assembly overview - track rod, multi-link suspension,
front-wheel drive", page 198
⇒ "5.2.2 Assembly overview - track rod, multi-link suspension,
four-wheel drive", page 199
5.2.1 Assembly overview - track rod, multi-link suspension, front-wheel drive
1 - Subframe
2 - Bolt
❑ Always renew after re‐
moving
❑ 70 Nm +180°
3 - Wheel bearing housing
4 - Connecting rod
❑ Removing and installing
⇒ page 203
5 - Bolt
❑ Always renew after re‐
moving
❑ Always tighten bolted
joints with suspension in
unladen position
⇒ page 8
❑ 70 Nm +180°
6 - Nut
❑ Always renew after re‐
moving
198
Rep. gr.42 - Rear suspension
⇒ page 8