– Slide protective tube -1- onto shock absorber mounting -2-.
– Fit cable tie -3- and tighten.
Note
The fastener -arrow- of the cable tie -3- must be located within
area -a-.
Specified torques
♦
⇒ "6.3 Repairing shock absorber", page 212
6.4
Removing and installing spring
⇒ "6.4.1 Removing and installing spring, torsion beam axle", page
215
⇒ "6.4.2 Removing and installing spring, multi-link suspension",
page 217
6.4.1
Removing and installing spring, torsion
beam axle
Special tools and workshop equipment required
♦ Spring compressor - V.A.G 1752/1-
♦ Spring retainer - V.A.G 1752/3A-
♦ Adapter - V.A.G 1752/9- , not illustrated
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
6. Suspension strut, shock absorber, spring
215