Steering Column; Assembly Overview - Steering Column - Seat Leon 2013 Workshop Manual

2

Steering column

⇒ "2.1 Assembly overview - steering column", page 345
⇒ "2.2 Checking steering column for damage", page 346
⇒ "2.3 Handling and transporting steering column", page 346
⇒ "2.4 Steering column: removing and fitting", page 347
⇒ "2.5 Removing and installing control unit for electronic steering
column lock J764 ", page 356
2.1

Assembly overview - steering column

Note
Always replace self locking nuts following their removal.
♦
Always renew corroded nuts and bolts.
♦
Replace the nuts and screws that are tightened with specified tightening angle.
♦
1 - Dash panel central tube
2 - Shear bolt
❑ Loosening and tighten‐
ing ⇒ page 356
3 - Right bracket
❑ For knee airbag
4 - Control unit for electronic
steering column lock - J764-
❑ For vehicles with key‐
less entry and start sys‐
tem "Keyless Access"
❑ Removing and installing
⇒ page 356
5 - Bolt
❑ Observe tightening se‐
quence ⇒ page 354
❑ Always renew after re‐
moving
❑ 20 Nm
6 - Left bracket
❑ For knee airbag
7 - Bolt
❑ Always renew after re‐
moving
❑ 20 Nm
8 - Bolt
❑ Always renew after re‐
moving
❑ 20 Nm +90°
9 - Steering column
❑ Removing and installing
⇒ page 347
.
Volkswagen Technical Site: http://vwts.ru http://vwts.info
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
345
2. Steering column