Seat Leon 2013 Workshop Manual page 153

♦ Torque wrench - V.A.G 1332-
♦ Engine and gearbox jack - VAS 6931-
Lowering subframe with attachments
– Remove rear wheels.
– Unbolt brake calipers on both sides of vehicle and suspend
from body.
– Remove the coil springs
– Remove rear silencer of exhaust system ⇒ Rep. gr. 26 ; Ex‐
haust pipes/silencers; Assembly overview - silencers .
Vehicles with vehicle level senders
– Disconnect connector -1- from vehicle level sender -2-.
Continuation for all vehicles
– Unplug electrical connector -1- from ABS speed sensor on
both sides and move clear.
– Disconnect the electrical connector -2-right and left of the en‐
gine of the electromechanical parking brake on the brake
caliper.
– Detach electrical wiring harness from retainers -arrows- and
move clear.
⇒ page 215 .
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
147
1. Rear axle