Seat Leon 2013 Workshop Manual page 339

Setting with or without preceding wheel alignment
– Remove the trim-1-.
– Remove dirt, if there is any, from the sensor lens.
– Position ACC setting device - VAS 6430/10- centrally and par‐
allel at a distance -a- from centrally fitted ACC reflector mirror
- VAS 6430/10- to adaptive cruise control unit - J428- .
a - 120 cm + 2.5 cm
Note
ACC setting device - VAS 6430- is not allowed to be moved on
alignment beam.
Sequence of steps for all
– Mount measurement transducers -1- of front wheels on align‐
ment beam.
– Use the adjusting screws -1-, -2- and -3- to bring spirit levels
-A- and -B- on - VAS 6430/10- horizontal.
– Adjust mirror -4- by means of crank handle -arrow- in such a
way that the laser beam hits the sensor lens in the middle.
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
333
3. Adaptive cruise control