León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
– Unscrew bolts -arrows- and remove heat shield -1- from steer‐
ing box.
Note
Different heat shields -1- are installed depending on the engine.
On some engines it is possible to access the connectors for the
steering rack without removing the heat shield.
– Disconnect connectors -1- and -2- from steering rack.
– Unclip wiring harness -1- from steering box -2- -arrows-.
– Pull out spreader clip -arrow-.
– Lower subframe using engine and gearbox jack - VAS 6931- .
28
Rep. gr.40 - Front suspension