Seat Leon 2013 Workshop Manual page 214

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
– Remove rear wheel housing liner ⇒ General body repairs,
exterior; Rep. gr. 66 ; Wheel housing liner; Removing and
installing rear wheel housing liner .
Vehicles with vehicle level senders
– Unscrew bolt -1-.
– Pull rear left - G76- lever -2- off axle beam -3-.
Vehicles with adaptive chassis control DCC
– Disconnect connector -1- on shock absorber -2-.
– Pull line -3- off shock absorber -2- -arrow-.
Note
If there is moisture in the area of the connector, blow compressed
air on the contacts on the shock absorber and the connector.
Continuation for all vehicles
– Attach spring compressor -1-.
1 - Spring tensor - V.A.G 1752/1-
2 - Spring retainer - V.A.G 1752/3A-
WARNING
Ensure that coil spring is correctly seated in spring retainers -
V.A.G 1752/3A- -2-.
– Compress coil springs until load on shock absorber is relieved.
– Unscrew bolts -1- for shock absorber -2-.
208
Rep. gr.42 - Rear suspension