Seat Leon 2013 Workshop Manual page 250

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
♦ Torque wrench - V.A.G 1332-
♦ Torque wrench - V.A.G 1410-
Removing
– Loosen bolt securing drive shaft at wheel hub
⇒ "8.4 Loosening and tightening threaded connections of drive
shaft", page 266 .
– Remove rear wheel on affected side.
– Remove coil springs
– Remove drive shaft
– Remove brake mount with brake caliper and fasten to body
with wire ⇒ Brake system; Rep. gr. 46 ; Rear brake; Assembly
overview - rear brake .
Note
Do not leave the brake clip hanging from the hose. It may be
damaged.
– Remove bolt for brake disc and remove brake disc.
– Remove bolts -arrows-.
– Pull wheel bearing unit from wheel bearing housing.
Caution
• Avoid soiling and damage to seal when placing on a sur‐
face/storing away.
244
Rep. gr.42 - Rear suspension
⇒ page 215 .
⇒ page 257 .