Seat Leon 2013 Workshop Manual page 107

11 - Locking plate
12 - Cover
❑ Drive off carefully with drift
❑ Coat sealing surface of constant velocity joint with -D 454 300 A2- before installing.
❑ Adhesive surface must be free of oil and grease!
13 - Inner constant velocity joint
❑ Always replace completely
❑ Pressing off ⇒ page 130
❑ Insertion ⇒ page 130
❑ Checking ⇒ page 138
14 - Retaining ring
❑ Remove and install with circlip pliers - VW 161 A-
15 - Cover
❑ Always renew after removing
❑ Always renew
❑ Pressing off ⇒ page 130
16 - Multi-point socket head bolt
❑ Always renew after removing
❑ M10 x 52
❑ Initially tighten diagonally to 10 Nm and then tighten diagonally to specified torque.
❑ 70 Nm
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
101
6. Drive shaft