Suspension Strut, Upper Suspension Link; Assembly Overview - Suspension Strut, Upper Suspension Link - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
3 Suspension strut, upper suspension
link
⇒ "3.1 Assembly overview - suspension strut, upper suspension
link", page 56
⇒ "3.2 Removing and installing suspension strut", page 57
⇒ "3.3 Repairing suspension strut", page 65
3.1

Assembly overview - suspension strut, upper suspension link

1 - Spring seat
❑ Check fitting position
2 - Shock absorber
❑ Different versions possi‐
ble. Refer to ⇒ Electron‐
ic parts catalogue "ET‐
KA"
3 - Bolt
❑ Always renew after re‐
moving
❑ Tip of bolt must point in
direction of travel.
❑ 70 Nm +180°
4 - Wheel bearing housing
❑ Different versions possi‐
ble. Refer to ⇒ Electron‐
ic parts catalogue "ET‐
KA"
5 - Nut
❑ Always renew after re‐
moving
6 - Dust guard
❑ Different versions possi‐
ble. Refer to ⇒ Electron‐
ic parts catalogue "ET‐
KA"
7 - Coil spring
❑ Removing and installing
⇒ page 65
❑ The surface of the spiral
spring must not be dam‐
aged
❑ Different versions possi‐
ble. Refer to ⇒ Electronic parts catalogue "ETKA"
8 - Axial roller bearing
9 - Buffer stop
❑ Different versions possible. Refer to ⇒ Electronic parts catalogue "ETKA"
10 - Telescopic arm bearing
❑ Pay attention to installation position
11 - Nut
❑ Always renew after removing
❑ 60 Nm
56
Rep. gr.40 - Front suspension
⇒ page 62 .
Volkswagen Technical Site: http://vwts.ru http://vwts.info