Seat Leon 2013 Workshop Manual page 333

Setting with or without preceding wheel alignment
– Remove the trim-1-.
– Remove dirt, if there is any, from the sensor lens.
– Position ACC setting device - VAS 6430/3- centrally and par‐
allel at a distance -a- from centrally fitted ACC reflector mirror
- VAS 6430/3- to adaptive cruise control unit - J428- .
a - 120 cm + 2.5 cm
Note
ACC setting device - VAS 6430- is not allowed to be moved on
alignment beam.
Sequence of steps for all
– Mount measurement transducers -1- of front wheels on align‐
ment beam.
– In zone -A- set the position -2- on the rotary control to cover
the marker on the mirror (Number 2 of the rotary control must
point towards the vehicle).
– Use adjusting screw -1- to level spirit level -2-.
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
327
3. Adaptive cruise control