Seat Leon 2013 Workshop Manual page 101

– Remove bolts -arrows-.
– Take wheel bearing unit out of wheel bearing housing.
Caution
• Avoid dirtying or damaging the seal when picking up, lay‐
ing down or storing the wheel bearing.
• The wheel bearing -1- must always face upwards when laying
down the wheel bearing unit.
• Always place wheel bearing unit on wheel hub -2-.
• Do not touch the inside of the wheel bearing when you pick it
up.
• Always take hold of the outside of the wheel bearing.
Installing
Installation is carried out in reverse order, noting the following:
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
95
5. Wheel bearing