Seat Leon 2013 Workshop Manual page 111

Vehicles with vehicle level senders
– Remove nut -1-.
– Pull bracket -2- for front left vehicle level sender - G78- and/or
for front right vehicle level sender - G289- out of suspension
link -3-, as applicable
Continuation for all vehicles
– Remove nuts -arrows- on swivel joint.
– Detach wishbone from swivel joint.
– Unbolt drive shaft from gearbox flange shaft -arrows-.
– Turn wheel bearing housing to left.
– Pull drive shaft out of wheel hub.
If the drive shaft cannot be pulled out of the wheel bearing by
hand, use press tool - T10520- .
Before using press tool - T10520- ensure that thrust piece -1- is
inserted.
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
105
6. Drive shaft