Seat Leon 2013 Workshop Manual page 124

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
Vehicles with vehicle level senders
– Remove nut -1-.
– Pull bracket -2- for front left vehicle level sender - G78- and/or
for front right vehicle level sender - G289- out of suspension
link -3-, as applicable
Continuation for all vehicles
– Unbolt drive shaft from gearbox flange shaft.
– Unscrew nuts -arrows-.
– Pull wheel bearing housing with swivel joint out of suspension
link.
– Pull drive shaft out of wheel hub.
If the drive shaft cannot be pulled out of the wheel bearing by
hand, use press tool - T10520- .
Before using press tool - T10520- ensure that thrust piece -1- is
inserted.
Using press tool - T10520- :
– To be able to press out the drive shaft -3-, secure press tool -
T10520- -1- to the wheel hub -2- using 3 wheel bolts.
118
Rep. gr.40 - Front suspension