Seat Leon 2013 Workshop Manual page 179

Installing locating pins - T10096-
– Unscrew bolt -1- on left and right.
• To fix position of subframe, locating pins - T10096- must be
screwed in successively at positions -2- and -3- on both sides
of vehicle.
– Remove one of the front bolts of the subframe -arrow-
– Screw in locating pins - T10096- -1-.
Note
The locating pins - T10096- must not be tightened to more than
20 Nm, otherwise the threads of the locating pins will be dam‐
aged.
– This procedure must now be carried out for the second front
bolt and the rear bolts of the subframe.
The position of the subframe is now fixed.
3.3.2 Fixing position of subframe, multi-link
suspension, four-wheel drive
Special tools and workshop equipment required
♦ Locking device - T10096-
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
173
3. Subframe