Seat Leon 2013 Workshop Manual page 240

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
– Use tensioning straps - T10038- to strap vehicle to support
beams of lifting platform on both sides.
WARNING
If the vehicle is not strapped down, it may slip off the lifting
platform.
– Position engine and gearbox jack - VAS 6931- -1- under track
rod and press upwards slightly.
– Unscrew bolts -2- and -3- one after the other.
– Remove engine and gearbox jack - VAS 6931- -1- under the
track rod.
– Unscrew nut -1-, and remove washer -2-.
– Unscrew bolt -4-.
– Remove shim -3-.
– Unscrew bolt -1-.
– Take out wheel bearing housing -2-.
Installing
Installation is carried out in reverse order, noting the following:
It is essential to follow specified sequence of work steps below!
234
Rep. gr.42 - Rear suspension