– Screw in locating pins - T10096- -1-.
Note
The locating pins - T10096- must not be tightened to more than
20 Nm, otherwise the threads of the locating pins will be dam‐
aged.
– Replace securing bolts on subframe one after the other on
both sides with a locating pin from the locating pin sets -
T10096- -1- and tighten to 20 Nm.
The position of the subframe is now fixed.
3.4
Repairing subframe
⇒ "3.4.1 Renewing bonded rubber bush (front)", page 177
⇒ "3.4.2 Renewing bonded rubber bush (rear)", page 183
3.4.1
Renewing bonded rubber bush (front)
Special tools and workshop
equipment required
♦ Tensioning strap - T10038-
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
177
3. Subframe