Seat Leon 2013 Workshop Manual page 177

– Turn support - T10552/2- -2- in such a way that hollow points
perpendicular to the direction of travel.
– Set dimension -b-.
b - 330 mm
Tighten bolt -arrow- to 30 Nm.
– Loosen mounting pins - T10552/1- -3- at bottom on both sides.
– Set dimension -c-.
c - 47 mm
– Turn threaded sleeve of mounting pins - T10552/1- -3- on both
sides to set dimension -d-.
d - 230 mm
– Place rear axle support - T10552- -1- on engine and gearbox
carrier - VAS 6931- .
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
171
3. Subframe