Seat Leon 2013 Workshop Manual page 304

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
Front axle Standard
a) G01/G02/
PR no.
G03/G17
Maximum permissi‐ Max. 30'
ble difference be‐
tween sides
Maximum wheel
turning angle (not
adjustable)
Ground clearance 384 mm
⇒ page 298
9) Camber cannot be adjusted. Corrections are possible by moving the subframe slightly.
10) The toe-out on turns can be displayed as a negative value on the wheel alignment computer, depending on the manufacturer.
Rear axle Standard
With multi-
link sus‐
pension
Total toe 23' ± 10'
Max. permissible Max. 10'
deviation from di‐
rection of travel
Camber
Maximum permissi‐ Max. 30'
ble difference be‐
tween sides
Ground clearance 381 mm
⇒ page 298
Measuring ride height
– The dimension -a- between the centre of the wheel hub and
the lower edge of the wheel housing defines the ride height.
298
Rep. gr.44 - Wheels, tyres, vehicle geometry
Running
running gear for
gear sports poor roads
model
G04/G05/ G06/G07/
G10/G11/
G14/G16
Max. 30'
40° 38' 40° 13'
369 mm
Running
running gear for
gear sports poor roads
model
With multi- With multi-
link sus‐
pension
(ML) (ML)
23' ± 10'
Max. 10'
-1° 10' -1° 10'
± 30' ± 30'
Max. 30'
366 mm
Running Running
gear for gear for
poor roads
G08/G09
G15/G18
Max. 30' Max. 30'
41° 05' 40° 38'
399 mm 384 mm
Running Running
gear for gear for
poor roads
With multi-
link sus‐ link sus‐
pension pension
(ML) (ML)
23' ± 10' 23' ± 10'
Max. 10' Max. 10'
-1° 10' -1° 10'
± 30' ± 30'
Max. 30' Max. 30'
396 mm 381 mm
Cupra run‐ Cupra run‐
ning gear ning gear
with DCC without
DCC
G12 G13
Max. 30' Max. 30'
38° 59' 40° 13'
359 mm 369 mm
Cupra run‐ Cupra run‐
ning gear ning gear
with DCC without
DCC
With multi- With multi-
link sus‐ link sus‐
pension pension
(ML) (ML)
8' ± 10' 8' ± 10'
Max. 10' Max. 10'
-1° 30' -1° 30' ±
± 30' 30'
Max. 30' Max. 30'
361 mm 366 mm
Cupra R
chassis
with DCC
G12 + UB1
+ 1X0
Max. 30'
35° 45'
359 mm
Cupra R
chassis
with DCC
With multi-
link sus‐
pension
(ML)
14' ± 10'
Max. 10'
-1° 55'
± 30'
Max. 30'
361 mm