Seat Leon 2013 Workshop Manual page 47

1 - Retainer (Counterhold) - VAS 6779/7-
2 - Tube - VAS 6779/6- , -arrow mark- on tube must align centrally
between both bolts -arrow-.
3 - Thrust piece - VAS 6779/9-
4 - Stepped ring - VAS 6779/8- ; mark -I- on stepped ring must
align with mark -X- on thrust piece - VAS 6779/9-
5 - Hydraulic press - VAS 6178- and thrust piece - T10205/13-
6 - Hexagonal nut - VAS 6779/3-
7 - Threaded spindle - VAS 6779/2-
– Press in both bonded rubber bushes together.
– Detach assembly tool - VAS 6779- from subframe and check
that pressed-in bonded rubber bushes are seated correctly.
– Bolt anti-roll bar to subframe and coupling rods.
– Install pendulum support ⇒ Rep. gr. 10 ; Assembly mountings;
Removing and installing pendulum support .
– Install front noise insulation ⇒ General body repairs, exterior;
Rep. gr. 66 ; Noise insulation; Assembly overview - noise in‐
sulation .
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
41
2. Subframe